How to Find the Right Silk PLA Filament Temperature?
XUCHUNThe shiniest section of a silk PLA test print can also have the most strings or the softest-looking bridges. To find a silk PLA filament temperature that works for your model, print a temperature tower with repeated features. Each section gives you the same surfaces and openings to judge at a different nozzle temperature.
Set up a four-step temperature tower
INKCLOUD lists 210–240°C for the nozzle and 55–65°C for the build plate for its PLA Silk. For a first test with this spool, try 230°C, 225°C, 220°C, and 215°C from bottom to top. Keep the bed temperature, layer height, cooling, and retraction the same throughout. Use an outer-wall speed close to the one you plan to use on the final model. INKCLOUD PLA Silk specifications
Use your slicer’s temperature calibration tool if available. OrcaSlicer can generate a tower with the temperature changes set for you. If you download a tower model, check that the print job actually changes the nozzle setpoint at each marked height. The numbers embossed on the model are labels. The temperature changes come from the sliced instructions. OrcaSlicer temperature tower guide · PrusaSlicer guide to temperature changes by layer
Read each section under the same light
| What to inspect | What to look for |
|---|---|
| Gloss | Compare the same face on every section. Look for a consistent finish across the wall. |
| Stringing | Look through the openings and count where fine strands appear between the posts. |
| Bridging | View the underside of each horizontal span. Check for sagging or loose lines across the opening. |
| Wall quality | Check the sides for gaps, thin lines, or layers beginning to separate. |
Compare the middle of each section, where the nozzle has had time to settle after the setpoint changes. If several adjacent temperatures give clean results, start near the middle of that range. OrcaSlicer guide to interpreting a temperature tower
Verify the temperature on your actual model
Print a small section that includes the feature you care about most. For a display piece, look at the visible wall under its intended lighting. For a model with open windows or slots, check the underside of the longest span. If you later change the outer-wall speed substantially, rerun the test. Both speed and temperature can affect the sheen. INKCLOUD PLA Silk finish guidancepla