SUNLU Wood PLA Filament: How to Identify Your Spool and Choose Settings?

Identify SUNLU Wood PLA by its material label, compare the published settings, and print a swatch before starting a full project.

By XUCHUN

SUNLU Wood PLA Filament: How to Identify Your Spool and Choose Settings?

XUCHUN

When you’re shopping for SUNLU Wood PLA filament, check the material name on the spool or listing. SUNLU describes its PLA Wood as containing 15% wood powder and lists shades such as Maple Wood, Walnut Wood, and Cherry Wood. Its PLA+ range also includes a shade called Oak. If you want wood-filled filament, look for PLA Wood and a wood-powder description before choosing a colour. SUNLU PLA Wood · SUNLU PLA+ colour list

Match the print settings to the product

SUNLU publishes different nozzle guidance in its WOOD technical data sheet and on its Upgraded Wood PLA 1 kg shop page. Both sources list a 50–60 °C bed range.

SUNLU source Published nozzle and speed guidance
WOOD technical data sheet 200–220 °C, with a listed print speed of up to 230 mm/s. SUNLU WOOD technical data sheet
Upgraded Wood PLA 1 kg shop listing Uses speed-specific temperature ranges. For 50–100 mm/s, it lists 195–205 °C. SUNLU Upgraded Wood PLA 1 kg settings

Use the guidance that matches your spool or package. If the label and the listing disagree, ask SUNLU to confirm the settings using the SKU or a photo of the label. Once you have the matching range, start with a short print at a moderate speed and check that the walls extrude evenly before you run a full plate.

Check the finish on a small part

If you’re choosing between light and dark wood tones, print the same small swatch in each colour. Include a flat face and a rounded edge, and keep the layer height and orientation the same. Set the samples beside the furniture or display surface under the lighting where the finished piece will be used. Once you’ve picked a colour, print a short section of the final part to confirm how its layer lines and corners will look.

If you’re comparing wood-filled filaments across brands, use each product’s own print settings. Explore INKCLOUD PLA Wood colours and specifications

Précédent Suivant
Laisser un commentaire 0 commentaire

    Lire plus d'articles