Galaxy PLA Filament: How to Print a Dice Tray with Readable Markings?

Print a sparkling dice tray with markings you can read from across the table. Compare raised two-color marks with painted recesses, then test both under your game-night lighting.

By XUCHUN

Galaxy PLA Filament: How to Print a Dice Tray with Readable Markings?

XUCHUN

Galaxy PLA Filament: How to Print a Dice Tray with Readable Markings

A purple dice tray can sparkle beautifully under a desk lamp. Set it on the game table, though, and the tiny score marks along its rim might disappear into the reflections. Give the tray’s broad surfaces room to show off the sparkle, then use a contrasting color for the marks players need to read.

Galaxy PLA filament contains fine reflective particles that catch the light as you turn the print. INKCLOUD PLA Galaxy comes in Galaxy Green, Galaxy Purple, and Nebula. For this project, a dark Galaxy PLA tray and light-colored markings are a good starting combination. INKCLOUD PLA Galaxy product guide

Design the rim for someone sitting across the table

Put the markings on a flat section of the rim where they can be read without picking up the tray. Use short, thick ticks or simple digits. If the markings track points, make every fifth tick longer so players can find their place at a glance.

Inspect the marks in the sliced preview. If a thin stroke disappears or two nearby ticks merge, widen the stroke or increase the spacing in the model. For marks printed flat on the rim, reducing layer height alone won’t recover a stroke that the slicer can’t fit across its width. PrusaSlicer guide to layers and perimeters

Pick a way to add contrast

Method How to do it What to check
Raised marks with a filament swap Finish the tray body at a single height and place the raised marks above it. Schedule a swap from Galaxy PLA to a light solid-color PLA at the first layer of the marks, using your printer’s supported color-change workflow. Step through the preview at the swap layer. If the rim is still printing at that height, it will pick up the second color too.
Recessed marks with paint Print the whole tray in Galaxy PLA, then fill the recessed marks with a compatible paint. Test application, cleanup, and drying on a spare piece first. Look for paint spreading into nearby layer lines or making the edges of small digits hard to read.

A layer-based swap works on a compatible single-nozzle printer because the color changes after the body is complete. If the marks share layers with a taller rim, paint-filled recesses give you a way to color those details after printing. PrusaSlicer color-change guide

Print a short section of rim first

Use a section of the actual model with the rim’s final angle and a few marks. Include the smallest digit or the closest pair of ticks. Print it in the same orientation you plan to use for the full tray.

Put the sample on the game table and look at it from your usual seat and from across the table. If the sparkle overwhelms the marks, try a stronger color contrast. If the marks are still hard to distinguish even under diffuse light, make them larger or space them farther apart. Once the marks read clearly, print the full tray and roll your usual dice to check that the rim keeps them inside.

Start with the settings for your spool

INKCLOUD lists 190–230°C for the nozzle, 55–65°C for the build plate, and support for 0.4, 0.6, and 0.8 mm nozzles for PLA Galaxy. A supported 0.4 mm nozzle is a practical starting point for a tray with small details. If you use a wider nozzle, re-slice and check that the smallest marks still appear. For a two-color print, verify that your printer’s swap workflow can accommodate both PLA profiles. INKCLOUD PLA Galaxy print settings

Frequently asked questions

Do I need a multicolor printer for cream marks on a purple tray?
A compatible single-nozzle printer can make the marks with one filament swap if they start above the rest of the tray. Paint-filled recesses also work with a single-color print.

Where will the sparkle be easiest to see?
Try it on the broad outside walls and floor of the tray. Rotate the test piece under your table lamp before choosing a color. The look can change with the viewing angle. INKCLOUD PLA Galaxy product guide

How can I make matching trays for a group?
Save the slicer project with the same orientation, nozzle profile, and color-change layer. Keep one finished rim sample so you can check the readability of the next batch under the same light.

Explore INKCLOUD Galaxy PLA Filament for dice trays, token holders, and other tabletop accessories.

Предыдущий Далее
Оставить комментарий 0 комментариев

    Читать больше статей