Matte vs. Metallic Paint for 3D Prints: Which Finish Should You Use?

Learn how matte and metallic paints look on 3D prints, where to use each finish, and how to test a clear coat before painting the full model.

By XUCHUN

Matte vs. Metallic Paint for 3D Prints: Which Finish Should You Use?

XUCHUN

Use matte paint on areas where you want colour and shape to read with low glare. Use metallic paint where you want a metal-like highlight that shifts as you turn the model. Matte describes the sheen of the surface. Metallic describes the visual effect created by reflective pigments. A metallic paint can have a satin sheen, which works well for a softer bronze or steel effect. Golden guide to reflective pigments · Golden example of a satin metallic-effect acrylic

Choose the finish by part of the model

Model feature Finish to try
Large armour panels or a display base Matte charcoal or another low-sheen colour to keep the broad shapes readable under bright light.
Rivets, trim, or a raised emblem Metallic bronze or silver to catch the light as the model turns.
A helmet or prop that should look cast in metal Satin metallic across the body, with matte paint in recessed sections for definition.

On a helmet, try matte charcoal across the shell and bronze only on the brow trim and side panels. View it from your normal display distance. If the bronze draws attention to the right areas, you can keep the metallic accents small.

Check layer lines before applying metallic paint

Sand visible seams and support marks, remove the dust, and apply a thin coat of primer compatible with your print and paint. Once the primer dries, tilt the model under a lamp so the light grazes the surface. If you can still see ridges where you plan to use metallic paint, smooth that area before adding colour. Use thin coats around engraved lines or small details so the finish preserves their shape. Formlabs guide to priming and painting 3D prints

Test the clear coat on a spare print

Paint a spare piece with the same primer and metallic colour. Once the paint is ready for topcoating, apply a compatible clear coat to half of the sample and leave the other half as a reference. Let it dry as directed, then turn the sample under your display light. A matte clear coat can soften the metallic highlight. If you want more of that reflection to show, compare a compatible satin clear on a second sample. Liquitex guide to varnish sheen

For small details such as panel lines, lettering, or decorative trim, a fine-tip paint marker gives you more control over where the colour lands. Explore the INKCLOUD 3D Model Painting Pen Set

Предыдущий Далее
Оставить комментарий 0 комментариев

    Читать больше статей