How to Prototype an Openwork Pendant with Red Wax Resin?

Print an openwork pendant prototype in red wax resin. Check the openings, chain fit, and hanging angle before sending the design for metal production.

By XUCHUN

How to Prototype an Openwork Pendant with Red Wax Resin?

XUCHUN

A pendant can look balanced on a screen and still hang at an awkward angle. Its openings may also look smaller at actual size, especially against dark fabric. A red wax resin prototype gives you a physical sample to check before you send the design for metal production.

For this project, start with a fan-shaped pendant with three openings and an integrated bail, the loop that connects the pendant to a chain or cord.

Compare two versions at actual size

Print two versions with the same outer silhouette and bail. Keep the original openings on one version and make them slightly wider on the other. Before slicing, check the thickness of the material left between the openings, especially where the narrow ribs meet the outer rim.

Place supports on the back or along thicker edges where possible. Review the sliced layers around the bail and the tips of the openings for features that start in midair. Use the resin maker’s instructions for washing, drying, and post-curing before evaluating the samples. Formlabs guide to jewelry print design and supports

Check how the pendant looks and hangs

  1. View it against light and dark backgrounds. Put each sample on a display form at the intended chain length. Step back and see whether you can distinguish all three openings. Use the same lighting and background for both versions.

  2. Try the actual chain or cord. If the chain must pass through the bail, check whether its widest end fitting passes through. Then see whether the bail moves freely along the chain.

  3. Check the front and side views. If the pendant tips forward or turns sideways, revise the bail position or angle and print another sample. Keep the pendant body the same so you can see what the bail change did.

Confirm the casting route before sending the file

The term red wax resin can describe a photopolymer with a red, wax-like finish. For direct investment casting, look for explicit approval in the resin manufacturer’s documentation and confirm that the casting shop accepts that exact formulation. Ask the shop which resin and burnout instructions it uses, and whether it needs changes to the narrow sections or bail before casting. Example of a red wax finish resin · Formlabs guide to casting printed jewelry patterns

Once the prototype hangs the way you want, send the approved CAD file with front and side photos of the sample on the intended chain. The photos give the jeweler a reference for the proportions and hanging angle you want to preserve.

Предыдущий Далее
Оставить комментарий 0 комментариев

    Читать больше статей