Glow-in-the-Dark PLA Filament at Jaycar: Which Spool Is Which?

Identify Jaycar’s green glow PLA by catalogue number, see which spool replaced the old 250 g roll, and find the settings for the spool you buy.

By XUCHUN

Glow-in-the-Dark PLA Filament at Jaycar: Which Spool Is Which?

XUCHUN

If you’re searching for glow-in-the-dark PLA filament at Jaycar, start with the catalogue number. Jaycar Australia still has a page for its older 250 g green spool, TL4134, and that page points to the 1 kg eSUN TL4495 as its replacement. You may also find a separate 1 kg SUNLU spool, TL6032. Check the number on the listing or box before you choose print settings.

Match the spool to the Jaycar catalogue number

Jaycar catalogue number Listed product What to check
TL4134 Green Glow in Dark PLA, 250 g, 1.75 mm The legacy listing points to TL4495 as its replacement. Jaycar TL4134
TL4495 eSUN Luminous Green, 1 kg, 1.75 mm Jaycar lists 210–230 °C for printing and 45–60 °C for the bed. It recommends a hardened nozzle. Jaycar TL4495
TL6032 SUNLU Glow in the Dark Green, 1 kg, 1.75 mm Jaycar lists 225 °C as the maximum nozzle temperature and directs you to the printed label for recommended settings. Jaycar TL6032

Check your settings if you’re replacing an older spool

If you saved a slicer profile for TL4134, save a separate profile for the replacement spool. Copy the temperatures from the matching listing or spool label, then print one small part before starting a full batch. If you use an enclosed feeder or dry box, check its spool size limits too. The replacement shares the old spool’s 1.75 mm filament diameter, while the roll weight changes from 250 g to 1 kg.

Use the catalogue number for Click & Collect

Open the page for the exact spool you want and select your preferred store. If Click & Collect is available, place the order and wait for Jaycar’s collection confirmation before travelling. Keep the catalogue number handy so you can match it to the box at pickup. Jaycar Click & Collect instructions

If you’re comparing other glow colours or spool sizes, check the specifications for the exact filament you plan to print. Explore INKCLOUD PLA Glow colours and sizes

ก่อนหน้า ถัดไป
แสดงความคิดเห็น 0 ความคิดเห็น

    อ่านบทความเพิ่มเติม