316 artículos encontrados
-
Check filament diameter, nozzle compatibility, and spool dimensions before ordering 1.75 mm glow-in-the-dark PLA.
-
Learn when to use an external spool for glow-in-the-dark PLA and how to set up a third-party filament profile in Bambu Studio.
-
Learn how to check the daylight and glow colors of white-looking PLA and use a glowing inlay in a white 3D print.
-
Set up your nozzle and bed for glow-in-the-dark PLA, then use one stepped test print to compare brightness at three thicknesses.
-
Seeing shiny and dull bands on the same silk PLA print? Use Bambu Studio’s Speed preview and a two-sample test to get a more...
-
Learn how to choose a silk PLA filament bundle, estimate how much filament you need in each color, and decide when to buy a...
-
Print a gold silk PLA picture frame with a beveled edge. Compare two rail profiles under the intended lighting and test a mitered corner...
-
Use a four-step temperature tower to compare silk PLA gloss, stringing, and bridge quality. Learn how to choose a nozzle temperature and verify it...
-
Set up silk PLA on an original Ender-3 or an Ender-3 V3 SE. Start with temperature and outer-wall speed, then tune retraction for your...
-
Find out why small silk PLA feet peel off the build plate. Use a first-layer test to check the surface, then try local brim...
-
Use a small cable comb to diagnose missing lines in silk PLA prints. Learn when to check retraction, filament feeding, and hotend cooling.
-
Use a crescent ornament to test silk PLA support settings. Learn where to place supports, how to tune the contact gap, and what to...