Smooth Corners, Less Finishing
Optimized flow creates clean transitions and smooth walls, reducing finishing work on prototypes and production parts.
Descrição
ReliablePrinting
Strong &Durable
SmoothExtrusion
NeatlyWound
WideCompatibility
Clean Detail at Changing Speeds
Refined surface detail stays consistent through speed changes, balancing quality and throughput.
High-Speed PETG, Higher Throughput
High-speed FDM performance shortens cycle times while maintaining a professional surface finish.
PARAMETER INFORMATION
PETG Basic
General FDM Filament
| PRINT SETTINGS | |||
|---|---|---|---|
| Pre-Print Drying (Filament Dryer) |
60±5°C, 4-8h | Print & Storage Humidity | <20% RH (Sealed with desiccant) |
| Nozzle Temperature | 230°C-260°C | Nozzle Diameter | 0.2/0.4/0.6/0.8mm |
| Build Plate Type | Cool Plate SuperTack/Textured PEI Plate/Smooth PEI Plate | Build Plate Temperature | 60-80°C |
| Cooling Fan | 0-60% | Print Speed | 50-200mm/s |
| Retraction Distance | 0.4-0.8mm | Retraction Speed | 30-60mm/s |
| Chamber Temperature | 35-50°C | Max. Overhang Angle | 70° |
| Max. Bridge Length | 30mm | Build Plate Surface Treatment | No treatment required |
MECHANICAL PROPERTIES
| Tensile Strength / MPa | Elongation at Break / % | Flexural Modulus / MPa | Flexural Strength / MPa | Impact Strength / kJ/m2 |
|---|---|---|---|---|
| 51 | 9 | 1950 | 75 | 34 |
Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.
| Nome da especificação | Valor da especificação |
|---|---|
| Padrão de cor | White, Orange 01, Pink, Beige, Antique Bronze, Black, Red, Yellow, Gray, Gold, Orange Red, Army green, Coffee, Blue, Green, Deep Green, Natural Wood, Light blue, Cyan, Dark gray, Silver, Purple Pink, Purple |
| Tipo de filamento | Polyethylene terephthalate glycol (PETG) |
| Acabamento | Gloss, Matte, Metallic |
| Material | PETG, PLA Galaxy |
| Tecnologia de impressão | FDM |
