Smooth Corners, Less Finishing
Optimized flow creates clean transitions and smooth walls, reducing finishing work on prototypes and production parts.
Описание
ReliablePrinting
Strong &Durable
SmoothExtrusion
NeatlyWound
WideCompatibility
Clean Detail at Changing Speeds
Refined surface detail stays consistent through speed changes, balancing quality and throughput.
High-Speed PETG, Higher Throughput
High-speed FDM performance shortens cycle times while maintaining a professional surface finish.
PARAMETER INFORMATION
PETG Basic
General FDM Filament
| PRINT SETTINGS | |||
|---|---|---|---|
| Pre-Print Drying (Filament Dryer) |
60±5°C, 4-8h | Print & Storage Humidity | <20% RH (Sealed with desiccant) |
| Nozzle Temperature | 230°C-260°C | Nozzle Diameter | 0.2/0.4/0.6/0.8mm |
| Build Plate Type | Cool Plate SuperTack/Textured PEI Plate/Smooth PEI Plate | Build Plate Temperature | 60-80°C |
| Cooling Fan | 0-60% | Print Speed | 50-200mm/s |
| Retraction Distance | 0.4-0.8mm | Retraction Speed | 30-60mm/s |
| Chamber Temperature | 35-50°C | Max. Overhang Angle | 70° |
| Max. Bridge Length | 30mm | Build Plate Surface Treatment | No treatment required |
MECHANICAL PROPERTIES
| Tensile Strength / MPa | Elongation at Break / % | Flexural Modulus / MPa | Flexural Strength / MPa | Impact Strength / kJ/m2 |
|---|---|---|---|---|
| 51 | 9 | 1950 | 75 | 34 |
Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.
| Название характеристики | Значение характеристики |
|---|---|
| Цветовой узор | Rainbow 01, Rainbow 02 |
| Тип филамента | Polyethylene terephthalate glycol (PETG) |
| Отделка | Gloss, Matte, Metallic |
| Материал | PETG, PLA Galaxy |
| Технология печати | FDM |
