Wood PLA Filament Temperature: How to Test Nozzle and Bed Settings?
XUCHUNINKCLOUD lists a 190–240 °C nozzle range and a 55–65 °C bed range for its PLA Wood on the listed build surfaces. For a first test on compatible PEI, try a 60 °C bed and compare nozzle temperatures with a small tower. If you use another wood-filled PLA, check its own guidance. For example, Prusa recommends 195 ± 10 °C for Prusament Woodfill. INKCLOUD PLA Wood settings · Prusament Woodfill settings
Print a four-step nozzle temperature tower
-
Choose a tower with repeated features. A short bridge and two separated posts in each section make it easier to compare sagging and stringing.
-
Schedule the nozzle temperature changes. For an INKCLOUD PLA Wood trial, try 220, 215, 210, and 205 °C from bottom to top. Use your slicer’s temperature tower tool or schedule a nozzle temperature change at the first layer of each section. Check that the changes are in the sliced job. The numbers on the model are labels. PrusaSlicer guide to layer-specific temperature changes
-
Keep the other settings fixed. Use the same speed, layer height, cooling, retraction, and bed temperature throughout the test. If your slicer makes a tower difficult to set up, print four copies of the same small model at those temperatures.
Choose the setting that works for your part
After the tower cools, compare the bridges, the threads between the posts, and how well the layers hold together. A cooler section may have fewer strings. If it also shows gaps or its layers separate easily during handling, try a warmer section with cleaner extrusion. Print a small piece of the final model at the chosen temperature to confirm the result. Prusa stringing guide · Prusa under-extrusion guide
Tune the bed with a separate first-layer test
If the first layer lifts, check that the plate is clean, that the slicer has the correct plate selected, and that the first layer is calibrated. Then repeat a small first-layer patch at 60 °C and 65 °C, provided both temperatures suit your plate and spool. Keep the nozzle temperature fixed so you can see what the bed adjustment changes. Prusa first-layer guide · INKCLOUD PLA Wood plate settings