Gaps in a 3D print first layer can come from excessive nozzle height, under-extrusion, uneven leveling, incorrect line width, or slicer path generation. Use...
First-layer failures do not all have the same cause. Use this symptom-based guide to diagnose adhesion loss, gaps, ridges, uneven leveling, corner lift, elephant...
Is your first layer attached but covered in ridges, waves, gaps, or nozzle scars? Learn how to identify incorrect nozzle height, uneven leveling, excessive...
Are the upper edges of your 3D print curling, sagging, or lifting? Learn how to distinguish true top-layer warping from pillowing, overheating, weak infill...
Is the bottom of your 3D print curved, raised, or uneven? Learn how to distinguish true warping from elephant foot, incorrect first-layer squish, support...
Resin prints can warp during printing, washing, drying or post-curing. Learn how orientation, supports, solvent exposure and uneven UV curing affect the final shape.
PLA is considered a low-warping filament, but poor first-layer contact, drafts and large flat geometry can still cause lifted corners. Follow a PLA-specific troubleshooting...