PLA Marble Filament Stone-Look Texture with PLA Durability
Create architectural models, sculptures, and décor with a natural speckled finish and the practical toughness of a PLA base.
Description
Impact Resistant
Eco-Conscious
Weather Resistant
Low Shrinkage
Uniform Marble Speckling Across the Spool
Evenly distributed stone-like flecks help maintain a consistent marble appearance across decorative models and production batches.
Broad Compatibility for FDM Workflows
Designed for common FDM printer platforms, making stone-look PLA easier to adopt across studios and print farms.
PARAMETER INFORMATION
PLA Marble
Aesthetic FDM Filament
| PRINT SETTINGS | |||
|---|---|---|---|
| Pre-Print Drying (Filament Dryer) |
50±5°C, 4-8h | Printing & Storage Environment | <20% RH (store in a sealed container with desiccant) |
| Nozzle Temperature | 190-230°C | Nozzle Size | 0.4/0.6/0.8mm |
| Build Plate Type | Stabilized Low-Temperature / Textured PEI / Smooth PEI | Build Plate Temperature | 55-65°C |
| Cooling Fan | 100% | Printing Speed | 50-200mm/s |
| Retraction Distance | 0.6-1.0mm | Retraction Speed | 20-40mm/s |
| Printing Environment Temperature | 25-45°C | Maximum Overhang Angle | 55° |
| Maximum Bridge Length | 30mm | Build Plate Surface Treatment | No special treatment required |
| Support | PLA-Specific Support Filament / PVA | ||
MECHANICAL PROPERTIES
| Tensile Strength / MPa | Elongation at Break / % | Flexural Modulus / MPa | Flexural Strength / MPa | Impact Strength / kJ/m2 |
|---|---|---|---|---|
| 33 | 6 | 2920 | 75 | 24 |
Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.
| Specification name | Specification Value |
|---|---|
| Color pattern | Marble, Brick Red |
| Finish | Matte |
| Material | Marble PLA, PLA Galaxy |
| Print technology | FDM |
Press & drag to view
