PEBA Flexible Filament for Flexible Designs
Engineered for repeated bending and compression, PEBA supports lightweight lattice structures and flexible components without limiting design freedom.
Description
Impact Resistant
High Flexibility
Lightweight Material
Excellent Resilience
Lighter Weight, Reliable Resilience
With a density stated to be 15–20% lower than TPU, PEBA helps reduce part weight while combining flexibility, resilience, toughness, and wear resistance.
Built to Absorb Impact
Its rubber-like response and elastic recovery make PEBA a strong choice for protective parts, sports equipment, cushioning structures, and impact-resistant prototypes.
PARAMETER INFORMATION
PEBA
Flexible FDM Filament
| PRINT SETTINGS | |||
|---|---|---|---|
| Pre-Print Drying (Filament Dryer) |
50±5°C, 4-8h | Printing & Storage Environment | <20% RH (store in a sealed container with desiccant) |
| Nozzle Temperature | 210°C-240°C | Nozzle Size | 0.4/0.6/0.8mm |
| Build Plate Type | Stabilized Low-Temperature / Textured PEI / Smooth PEI | Build Plate Temperature | 30-35°C |
| Cooling Fan | 100% | Printing Speed | 20-100mm/s |
| Retraction Distance | 0.4-0.8mm | Retraction Speed | 20-40mm/s |
| Printing Environment Temperature | 25-45°C | Maximum Overhang Angle | 55° |
| Maximum Bridge Length | 20mm | Build Plate Surface Treatment | No special treatment required |
| Support | / | ||
MECHANICAL PROPERTIES
| Tensile Strength / MPa | Elongation at Break / % | Flexural Modulus / MPa | Flexural Strength / MPa | Impact Strength / kJ/m2 |
|---|---|---|---|---|
| 12 | >1000 | / | / | 124 |
Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.
| Specification name | Specification Value |
|---|---|
| Color pattern | White, Orange 01, Black, Yellow, Red |
| Material | PEBA, PLA Galaxy |
| Print technology | 3D printing |
Press & drag to view
