PLA-HF Filament

High Speed PLA Filament is engineered for smooth, stable extrusion at speeds up to 500 mm/s, delivering faster printing, consistent detail, and broad FDM printer compatibility.

High-Speed P

Stable Performance

Resistant Flow

Strong Layer

Finish More in Less Time with High Speed PLA Filament

Optimized high-flow performance accelerates printing, helping you complete models faster than with standard PLA.

Compatible with 99% of 3D Printer Brands

Broad compatibility makes PLA HF a reliable choice for a wide range of high-speed and standard FDM 3D printers.

Print at Speeds up to 500 mm/s

Advanced melt-flow performance supports fast, stable extrusion while maintaining clean details and consistent surface quality.

PARAMETER INFORMATION

PLA-HF

General FDM Filament

PRINT SETTINGS
Pre-Print Drying (Filament Dryer)	50±5°C, 4-8h	Printing & Storage Environment	<20% RH (store in a sealed container with desiccant)
Nozzle Temperature	190-230°C	Nozzle Size	0.4/0.6/0.8mm
Build Plate Type	Stabilized Low-Temperature / Textured PEI / Smooth PEI	Build Plate Temperature	55-65°C
Cooling Fan	100%	Printing Speed	50-500mm/s
Retraction Distance	0.6-1.0mm	Retraction Speed	20-40mm/s
Printing Environment Temperature	25-45°C	Maximum Overhang Angle	55°
Maximum Bridge Length	30mm	Build Plate Surface Treatment	No special treatment required
Support	PLA-Specific Support Filament / PVA

MECHANICAL PROPERTIES

Tensile Strength / MPa	Elongation at Break / %	Flexural Modulus / MPa	Flexural Strength / MPa	Impact Strength / kJ/m2
32	11	2750	75	20

Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.

Product specifications table
Specification name	Specification Value
Color pattern	White, Beige, Black, Red, Gray
Finish	Matte, Gloss
Material	PLA Galaxy
Print technology	3D printing

TOP