119 artículos encontrados
-
Set up your first wood PLA print, choose between a 0.4 mm and 0.6 mm nozzle, and troubleshoot uneven extrusion or stringing.
-
Estimate how many parts you can print from a 1 kg spool of glow PLA using sliced plate weights and a reserve for testing...
-
Learn when to use an external spool for glow-in-the-dark PLA and how to set up a third-party filament profile in Bambu Studio.
-
Set up your nozzle and bed for glow-in-the-dark PLA, then use one stepped test print to compare brightness at three thicknesses.
-
Seeing shiny and dull bands on the same silk PLA print? Use Bambu Studio’s Speed preview and a two-sample test to get a more...
-
Use a four-step temperature tower to compare silk PLA gloss, stringing, and bridge quality. Learn how to choose a nozzle temperature and verify it...
-
Set up silk PLA on an original Ender-3 or an Ender-3 V3 SE. Start with temperature and outer-wall speed, then tune retraction for your...
-
Use a crescent ornament to test silk PLA support settings. Learn where to place supports, how to tune the contact gap, and what to...
-
Use a small rocket ornament to tune silk PLA cooling. Check whether the tip slices correctly, adjust the layer-time threshold, and compare a single...
-
Test two links before printing a full silk PLA dragon. Learn how to spot fused joints, first-layer expansion, and links that split when they...
-
Check which Bambu Lab printers suit ABS, then diagnose corner lift based on when it appears. Use a small bracket to test the plate,...
-
Print a pair of rainbow PETG bookends with similar color bands. Learn how to mirror the parts, check the print sequence, and keep the...