Flexible by Design
Engineered for repeated bending and compression, PEBA supports lightweight lattice structures and flexible components without limiting design freedom.
Descrição
Impact Resistant
High Flexibility
Lightweight Material
Excellent Resilience
Lighter Weight, Reliable Resilience
With a density stated to be 15–20% lower than TPU, PEBA helps reduce part weight while combining flexibility, resilience, toughness, and wear resistance.
Built to Absorb Impact
Its rubber-like response and elastic recovery make PEBA a strong choice for protective parts, sports equipment, cushioning structures, and impact-resistant prototypes.
PARAMETER INFORMATION
PEBA
Flexible FDM Filament
| PRINT SETTINGS | |||
|---|---|---|---|
| Pre-Print Drying (Filament Dryer) |
50±5°C, 4-8h | Print & Storage Humidity | <20% RH (Sealed with desiccant) |
| Nozzle Temperature | 210°C-240°C | Nozzle Diameter | 0.4/0.6/0.8mm |
| Build Plate Type | Engineering Plate/Textured PEI Plate/Smooth PEI Plate/High Temp Plate | Build Plate Temperature | 30-35°C |
| Cooling Fan | 100% | Print Speed | 50-100mm/s |
| Retraction Distance | 0.4-0.8mm | Retraction Speed | 20-40mm/s |
| Chamber Temperature | 25-45°C | Max. Overhang Angle | 55° |
| Max. Bridge Length | 20mm | Build Plate Surface Treatment | No treatment required |
MECHANICAL PROPERTIES
| Tensile Strength / MPa | Elongation at Break / % | Flexural Modulus / MPa | Flexural Strength / MPa | Impact Strength / kJ/m2 |
|---|---|---|---|---|
| 12 | >1000 | / | / | 124 |
Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.
| Nome da especificação | Valor da especificação |
|---|---|
| Padrão de cor | White, Orange 01, Black, Yellow, Red |
| Material | PEBA, PLA Galaxy |
| Tecnologia de impressão | 3D printing |
